INSUL-MATE™
Deep Corrugated Sheeting

DESCRIPTION/SPECIFICATIONS
RPR Products manufactures deep corrugated sheeting forming a continuous pattern of ribs on 2.67” centers. 2.67” deep corrugated can be made in 7/8”, 5/8” and 1/2” depths.  Insul-Mate™ deep corrugated sheets are produced to a standard siding profile with a choice of either both longitudinal edges of the sheet formed down, or one longitudinal edge formed up and one formed down.

             Alloys:    • Aluminum 3003, 3105
                            • Stainless Steel T304, T316
                            • Galvanized
                            • Galvalume Plus 

    Thicknesses:    Aluminum - .016” (.4mm), .020” (.5mm), .024” (.6mm), .032” (.8mm), .040” (1.0mm)
                             Stainless Steel - .010” (.25mm), .016” (.4mm), .020” (.5mm), .024” (.6mm), .032” (.8mm)
                             Galvanized - 130ga, 28ga, 26ga, 24ga, 22ga, 20ga, 18ga
                             Galvalume Plus -  .016” (.4mm), .020” (.5mm), .024” (.6mm), .032” (.8mm)

            Widths:    See chart below

          Lengths:    3’ to 32’ Roll formed                           
                           12” to 12’ 3” Drum corrugated

             Colors:    Standard colors available (see color chart)
                            Special colors upon request (minimums apply)

MOISTURE RETARDER
For added protection a moisture retarder can be applied to the inside of the metal. (See Moisture Retarder Data Sheet)