RPR Houston
  • Home
  • Jacketing
    • Sheet and Roll Jacketing >
      • Aluminum Jacketing
      • Stainless Steel Jacketing
      • Painted Jacketing >
        • Dura-Mate-70-hpc-tf
      • Aluminum Alclad
      • AZ-60
      • Galvanized Steel
    • Industrial Jacketing >
      • 1 1/4" Corrugated Sheets
      • 2.67" Corrugated Sheets
      • 4" Box Rib
      • 7.2 Rib Siding
      • Insul-Box Corrugated Sheets
  • Elbows & Tees
    • Aluminum Tees
    • Elbow Covers
    • Aluminum and Multi-Mate Size Chart for 90° Elbow Covers
    • Aluminum & Stainless Steel 316 Size Chart for 45 Elbows
    • Commercial Aluminum Fittings
    • Stainless Steel Size Chart for 90 Elbows
    • Short Radius Chart
    • Packaging Data - SS Elbow Covers
  • Fastening
    • Toggle Latch
    • Banding
    • Cut & Clip Banding
    • S&J Clips
    • White Steel Banding
    • Stainless Steel Closed Seals
    • Wing Seals
    • More Fastening Products
  • Add'l Products
    • Springs
    • Support Steel
    • Acoustical >
      • 1 # Mass Filled Vinyl
      • Acousti-Jac MFV
      • Acoustical Sheeting
    • Moisture Barriers
    • Tie Wire and Hex Netting
    • Melting Point
    • ARRA Compliance
    • Color Chart
    • Policy MSDS
    • More Products
  • Job Photographs
  • Contact Us
Picture

INSUL-MATE™
Aluminum and Stainless Steel Elbow Covers
(90°’s, 45°’s, MULTI-MATE’S, TEES)


DESCRIPTION - ALUMINUM
Insul-Mate™ aluminum elbow covers are precision formed and are sized to cover and weather protect insulated elbows. They are formed from .024” thick, 1100 alloy, O-temper aluminum which is coated with baked-on epoxy paint on the inside to resist electrolytic decomposition and a proprietary composite polyester resin paint system on the outside to resist oxidation. The elbow covers are manufactured to meet ASTM C-450 specification.

Insul-Mate™ aluminum 90° elbow covers

Insul-Mate™ aluminum 45°elbow covers

Multi-Mate™ aluminum 90° elbow covers

Insul-Mate™ aluminum  Tee covers

See corresponding charts for sizes.

DESCRIPTION - STAINLESS STEEL
Insul-Mate™ stainless steel elbow covers are precision formed and are sized to cover and weather protect insulated elbows. They are formed from .016” thick, T316 stainless steel alloy. The elbows are manufactured to meet ASTM C-450 specification. Insul-Mate™ stainless steel elbows fit 90 degree and 45 degree insulated elbows from ½” to 10” nominal iron pipe size.

To Convert Inches to millimeters:  Multiply Inches x 25.4 (Example: 1” x 25.4 = 25.4mm)







CORPORATE OFFICES & PLANT  |  RPR PRODUCTS, INC.  |  407 DELZ  |  HOUSTON, TEXAS 77018
sales@rprhouston.com | PHONE 713.697.7003 OR 1.800.231.0149  |  FAX 713.697.1844

Design by Houston Graphic Designer Jay Stevens
Website by Jay Stevens Design