RPR Houston
  • Home
  • Jacketing
    • Sheet and Roll Jacketing >
      • Aluminum Jacketing
      • Stainless Steel Jacketing
      • Painted Jacketing >
        • Dura-Mate-70-hpc-tf
      • Aluminum Alclad
      • AZ-60
      • Galvanized Steel
    • Industrial Jacketing >
      • 1 1/4" Corrugated Sheets
      • 2.67" Corrugated Sheets
      • 4" Box Rib
      • 7.2 Rib Siding
      • Insul-Box Corrugated Sheets
  • Elbows & Tees
    • Aluminum Tees
    • Elbow Covers
    • Aluminum and Multi-Mate Size Chart for 90° Elbow Covers
    • Aluminum & Stainless Steel 316 Size Chart for 45 Elbows
    • Commercial Aluminum Fittings
    • Stainless Steel Size Chart for 90 Elbows
    • Short Radius Chart
    • Packaging Data - SS Elbow Covers
  • Fastening
    • Toggle Latch
    • Banding
    • Cut & Clip Banding
    • S&J Clips
    • White Steel Banding
    • Stainless Steel Closed Seals
    • Wing Seals
    • More Fastening Products
  • Add'l Products
    • Springs
    • Support Steel
    • Acoustical >
      • 1 # Mass Filled Vinyl
      • Acousti-Jac MFV
      • Acoustical Sheeting
    • Moisture Barriers
    • Tie Wire and Hex Netting
    • Melting Point
    • ARRA Compliance
    • Color Chart
    • Policy MSDS
    • More Products
  • Job Photographs
  • Contact Us
Picture

INSUL-MATE™
Galvalume® AZ-60 Coated Steel

DESCRIPTION/SPECIFICATIONS
Galvalume®Plus, AZ-60 coated steel sheet and jacketing is a manufactured product consisting of, sheet steel product having a coating of corrosion resistant aluminum-zinc alloy applied by a continuous hot dip process as specified by ASTM A792. The composition of the coating is typically 55% aluminum, 1.6% silicon, and the balance zinc. AZ-60 Coated Steel has a nominal coating weight of .60 ounces/square foot (total both sides) which is equivalent to .96 mil thickness on each side. This coating provides the optimum combination of durability, sacrificial protection and resistance to crevice corrosion in most environments.

                  Thicknesses:    .016” (.4mm), .020” (.5mm), .024” (.6mm) and .032” (.8mm)

                           Widths:    Flat Sheets - 36” (914mm)
                                           For Profiled sheets see Industrial Jacketing Data Sheet for sizes

                         Lengths:    Flat Sheets (cut to length)
                                           Profiles cut to specific length lengths

                         Profiles:     See Industrial Jacketing Data Sheet
                                           (4” Box Rib, 2.67” & 1 1/4” Corrugated)

FINISHES
Insul-Mate™ AZ-60 is available in smooth and stucco embossed. The stucco embossed finish on sheets reduces glare from sunlight, adds strength and has more potential for masking application fingerprints, scratches, dents and other minor surface blemishes. A variety of pre-painted systems for added corrosion resistance are also available upon special request. 

APPLICATIONS
Insul-Mate™ AZ-60 sheet, both bare and pre-painted (special order), is intended for applications where the combination of superior corrosion resistance and high strength is required. It can be applied in most hostile environments as found in power plants, refineries, and in the chemical process industry. It can also be used in conjunction with aluminum without negative results.
 
MOISTURE RETARDER
Insul-Mate™ Galvalume Plus AZ60 can be supplied with a 3 mil polysurlyn moisture retarder which is heat and pressure bonded to the interior surface. A moisture retarder helps prevent galvanic corrosion caused by contact of dissimilar metals in the presence of moisture or chemical corrosion caused by installing sheets over damp insulation materials.

(See Moisture Retarder Data Sheet)






CORPORATE OFFICES & PLANT  |  RPR PRODUCTS, INC.  |  407 DELZ  |  HOUSTON, TEXAS 77018
sales@rprhouston.com | PHONE 713.697.7003 OR 1.800.231.0149  |  FAX 713.697.1844

Design by Houston Graphic Designer Jay Stevens
Website by Jay Stevens Design